How to Unflood a Chainsaw

Chainsaws are an essential tool in the landscaping industry, but they can sometimes be a bit temperamental, especially when it comes to starting them. One common issue chainsaw users encounter is a flooded engine.

When a chainsaw engine is flooded, it means there is too much fuel in the combustion chamber, making it difficult to start the chainsaw. But fear not, unflooding a chainsaw is a relatively simple process that can be done with just a few steps. In this guide, we will walk you through the process of unflooding a chainsaw, so you can get back to work in no time.

  1. Check the Air Filter: The first step in unflooding a chainsaw is to check the air filter. A clogged air filter can restrict airflow to the engine, causing it to flood. Remove the air filter and inspect it for any dirt or debris. If the air filter is dirty, clean or replace it before attempting to start the chainsaw again.
  2. Remove the Spark Plug: Next, you'll want to remove the spark plug from the chainsaw. This will allow any excess fuel in the combustion chamber to evaporate. Use a spark plug wrench to carefully remove the spark plug from the engine.
  3. Pull the Starter Cord: With the spark plug removed, pull the starter cord several times to help clear out the excess fuel from the combustion chamber. Be sure to do this in a well-ventilated area, as there may be some fuel vapor coming out of the spark plug hole.
  4. Let it Sit: After pulling the starter cord a few times, let the chainsaw sit for a few minutes to allow any remaining fuel to evaporate. This will help ensure that the engine is clear of excess fuel before attempting to start it again.
  5. Reinstall the Spark Plug and Air Filter: Once you've allowed enough time for the excess fuel to evaporate, reinstall the spark plug and air filter. Be sure to tighten the spark plug securely, but be careful not to over-tighten it.
  6. Start the Chainsaw: With the spark plug and air filter reinstalled, attempt to start the chainsaw as you normally would. With any luck, the chainsaw should start up without any issues, now that the excess fuel has been cleared from the engine.

In Conclusion

Unflooding a chainsaw is a simple process that can be done with just a few steps. By following the steps outlined in this guide, you can quickly and easily get your chainsaw back up and running. If you need any chainsaw parts, remember that Chainsaw Parts is here to help. Simply use our search bar use our Parts Lookup to find the parts you need. And if you have any questions or need assistance, Contact us!

Jun 12th 2024

Recent Posts